Products zintek® roofing

ZINTEK SRL

zintek® roofing

Roofing and Siding Panels

Zintek srl is characterized by the provision of coatings for roofs, facades, flashings and wall coverings made of titanium zinc laminate according to UNI EN 988. The natural look of zintek® is glossy grey lamination, smooth and shiny. Under the action of weathering the surface covers itself with a protective layer that remains stable over time and gives it a natural aging, with a pleasant grey slate appearance. The natural appearance of the laminate can be varied thanks to special surface treatments without altering the corrosion resistance prerogatives. The laminates with surface treatment are referred to as preweathered. Contrary to other materials zintek® requires no maintenance. zintek® products must be transported in special covered vehicles ensuring a dry and ventilated space. The same applies to loading and unloading, which must always take place in a dry, ventilated, and covered place. Stockpiles must be kept dry, and outdoor storage is to be avoided. Directly covering the coils or profiles should be avoided if there are no spaces between one aerated product and another. It is necessary to prevent condensation from forming below the dew point in the warehouse. For further information consult the 'Development in Architecture' manual or ask the quality assurance office.

Note: All the information below was checked with advisor QualityNet support

Green Features #5

  • FSC

    done
  • LCA

    done
  • Recyclable Product Packaging

    done
  • Recyclable material

    done
  • SRI

    done

Credits for LEED® System #0

LEED NC ITALIA 2009

SSc7.2 Effetto isola di calore: coperture

GAp1 Riduzione dell'uso dell'acqua

MRc2 Gestione dei rifiuti da costruzione

MRc3 Riutilizzo dei materiali

MRc4 Contenuto di riciclato

MRc5 Materiali estratti, lavorati e prodotti a distanza limitata (materiali regionali)

SSp1 Prevenzione dell'inquinamento da attività di cantiere

LEED NC 2009

SSp1 Construction Activity Pollution Prevention

SSc7.2 Heat Island Effect—Roof

WEp1 Water Use Reduction—20% Reduction

MRc2 Construction Waste Management

MRc3 Materials Reuse

MRc4 Recycled Content

MRc5 Regional Materials

LEED FOR SCHOOLS 2009

SSp1 Construction Activity Pollution Prevention

SSc7.2 Heat Island Effect—Roof

WEp1 Water Use Reduction—20% Reduction

MRc2 Construction Waste Management

MRc3 Materials Reuse

MRc4 Recycled Content

MRc5 Regional Materials